Porosity Sealer
Fibrecoat Porosity Sealer and Porosity Sealer Flex are single-component, solvent-based low viscosity primers designed for use as a general-purpose primer for most well-dry porous substrates.
Coverage rates
Typical coverage rates
Application qty's will vary depending on surface condition
Curing times
Typical curing times at 15ºc
Touch dry
Min overcoating
Full cure
Times may vary due to changing temperatures
PU Activator
A single-component, low-viscosity primer or activator designed for priming non-porous surfaces such as exposed metal, PVC, polyurethanes, GRP, glass and polyurea coatings.
Coverage rates
Typical coverage rates
Application qty's will vary depending on surface condition
Curing times
Typical curing times at 15ºc
Touch dry
Min overcoating
Full cure
Times may vary due to changing temperatures
Humidity Primer
The humidity Primer is a two-component water-based epoxy primer, used to prime and seal porous substrates including highly porous asphalt, concrete and wooden surfaces.
Surfaces
- Asphalt
- Aged Asbestos
- Concrete (Wet)
- Wood
Coverage rates
Typical coverage rates
Application qty's will vary depending on surface condition
Curing times
Typical curing times at 15ºc
Touch dry
Min overcoating
Max overcoating
Times may vary due to changing temperatures
Need some help?
Give us a call, request a callback or browse our support section for more information on Fibrecoat.
