Fibretrims are manufactured from pultruded glass fibre plastics in the UK to ISO9001 standards. The enhanced composition ensures that the trims are extremely durable, maintenance free and resilient to adverse weather conditions.

There are over 20 different pre-formed Fibretrims designed to accommodate the most common roof details. The profiles come in 3-metre lengths and are supplied in a pre-coloured finish for easy overpainting with the Fibrecoat resin system, the profiles can be easily cut on-site to follow the alignment of the roof's edge.

A range of pre-formed corners have been designed to compliment the Fibretrim profiles that eliminates the need for on-site mitre cutting or additional lamination, These corners ensure a neat, accurate and watertight detail at any change in roof direction.



The C150 is a simulated lead flashing, generally fitted in conjunction with D260 wall fillet trim.

The trim is fitted into a bed joint of the brickwork or a 25mm deep slot cut out with an angle grinder fitted with a mortar chase disc. Apply Sharkseal or standard roofing trim adhesive to the back of the trim at 300mm centres. Fit the trim into the slot and press it firmly back into the wall. Apply a clear silicone sealant along the length of the C150 into the slot.


Compatible trims and corners


Trim guide

How to apply Fibretrims to a flat roof


You may also need

Privacy Preference Center