Overview

Add some life to your flat roof

The low maintenance and instant impact of our pre-grown Sedum green roofing modules makes them an obvious choice. Your Sedum module will be supplied with established plant coverage, growing on 60mm 100% recycled growing media.

Soil mix

The soil used in the module is a special mixture prepared specifically for the Sedum green roofing module, but particular mixes can also be prepared depending on the planting & project requirements.

Carrier

Made from recycled HDPE plastic, the carrier performs the following roles – a water reservoir, drainage layer, protection from excessive drying of roots from the airspace below, the cups greatly improve product handing making it easier to install.

Connections

The green roofing module is equipped with a double-action coupling system. The tabs on the side of each part engage the edge in the gaps between the tabs of the facing part making them really easy and quick to connect.

Installations

Applying the green roofing modules over your completed Fibrecoat roof is really simple. Lay the protection fleece (included with the module) over the entire area and install the optional metal guards on the edges of the roof. Clip the green roofing modules together over the roof area trimming the protection fleece and cutting the modules to size as required.


Specifications

Pack size

Dimension details for the Sedum green roof modules. Each kit contains 4 modules along with the protection fleece.

Properties

General product properties for the Sedum green roof module.

  • Compressive strength 2000 Kg/m²
  • Water holding capacity of 20 litres/m²
  • UV resistant
  • Temperature range 50°C – 80°C
  • Carrier material 100% Regenerated
  • Drainage Surface 318 cm2/m²
  • Outflow Volume 40 l/m²
  • Saturated weight 65kg/m²

You may also need

Privacy Preference Center