Overview

Fibretrims are manufactured from pultruded glass fibre plastics in the UK to ISO9001 standards. The enhanced composition ensures that the trims are extremely durable, maintenance free and resilient to adverse weather conditions.

There are over 20 different pre-formed Fibretrims designed to accommodate the most common roof details. The profiles come in 3-metre lengths and are supplied in a pre-coloured finish for easy overpainting with the Fibrecoat resin system, the profiles can be easily cut on-site to follow the alignment of the roof's edge.

A range of pre-formed corners have been designed to compliment the Fibretrim profiles that eliminates the need for on-site mitre cutting or additional lamination, These corners ensure a neat, accurate and watertight detail at any change in roof direction.


Application

The E280 is used both to create expansion joints on large roofs (over 50m2) and create rolls on any ridge details and is compatible with C5 closures.

An adequate gap in the deck should be cut if necessary, the trim should then be nailed to each end of the decking at 300mm centres. The join over the nails should then be bandaged and the laminate should be applied over the trim. To bond these trims together, or to cap them with C5 closures, apply a thin strip of PU adhesive to the inside edge of the overlapping trim and rub it into place.


Dimensions


Compatibility

Compatible corners for this trim.


Guide

Trim guide

How to apply Fibretrims to a flat roof


Questions


You may also need

Privacy Preference Center