Overview

Fibretrims are manufactured from pultruded glass fibre plastics in the UK to ISO9001 standards. The enhanced composition ensures that the trims are extremely durable, maintenance free and resilient to adverse weather conditions.

There are over 20 different pre-formed Fibretrims designed to accommodate the most common roof details. The profiles come in 3-metre lengths and are supplied in a pre-coloured finish for easy overpainting with the Fibrecoat resin system, the profiles can be easily cut on-site to follow the alignment of the roof's edge.

A range of pre-formed corners have been designed to compliment the Fibretrim profiles that eliminates the need for on-site mitre cutting or additional lamination, These corners ensure a neat, accurate and watertight detail at any change in roof direction.


Application

The G180 trim is used to allow for expansion on large roofs (over 50m2) it also acts as an integral gutter to aid drainage.

The decking should be cut to allow for an adequate gap in which to insert the trim. the flanges of the trim should be parallel with the decking. The trim should then be nailed to the decking. The join between where the trim edges are nailed and the decking should then be bandaged and the laminate should be applied over the trim.


Dimensions


Guide

Trim guide

How to apply Fibretrims to a flat roof


Questions


You may also need

Privacy Preference Center